vibrating screen

What Are The Maintenance Mode of Vibrating Sieve Vibrator?

vibrating screen

First,when the vibrating screen  leaving the factory,the vibrating sieve vibrator inside a lubricating oil,both anti-corrosion performance,valid for three months.Storage or after more than three months,movement 20min,which still can continue to corrosion protection for three months,work must be put onclean lubricating oil.

Second,need often keep the venthole of vibrator unblocked (the oil spill caused by blocked easily).If still leak after open,you should replace the oil seal.

Third,the normal work of the bearing should not exceed 75°C,because of the new vibrating sieve vibrator there is a running-in process,so may be slightly higher temperature,but after running after 8h,the temperature should be stable,if the temperature continues to too high,should check the oil level, and the purity of the oil.

Fourth,ensure the labyrinth slot is full of grease,it’s work in a large quantity of dust situation,which should be more frequently filling grease.

Fifth,replacing the V belt,should complete loosen bolts in motor,conveniently put V belt in pulley groove,which is not allowed to use sticks or other objects pry V belt,V belt tension must be fit,pulley must be positive,after the first adjust the tension,work for 48h,need readjust it again.

Sixth,sieve vibrator and vibrating screen machine box coupling bolts for high strength bolts,which is not allowed tore place with ordinary bolts,must check periodically tighten situation, at least check once a month.One any loose bolts,which can also lead to other bolt shearing and cause machine damage.

More information,please view here:http://www.pkvibratingscreen.com/

Posted in dynamic.

发表评论

电子邮件地址不会被公开。 必填项已用*标注